Last week I got one of my flowerbeds back in order, and I guess was inspired by that to create some flower cards.
The first one uses a 'shrub' stamp from 'Enjoy Life' stamp set. I used 4 different colours stamping the image multiple times at the bottom of the Whisper White card stock. The colours were 'Soft Sea Foam', 'Gray Granite', 'Balmy Blue' and 'Petal Pink'. The card base is 'Gray Granite'. I also used the new Petal Pink and Silver Bakers twine.
The second card is made using 'Varied Vases' stamp set and Tropical Escape 6x6 paper. The 'Varied Vases' is also designed by a fellow Stampin'Up! demonstrator Mary Fish, who designed this set as a reward for Million Sales Achiever. The colours used for stamping are 'Berry Burst', 'Soft Sea Foam', 'Balmy Blue' and... oh well.. one of the pinks... I think Powder Pink or Blushing Bride... Cannot remember and didn't write it down. the flowers are then coloured using Blender Pen and matching ink, to create a more subtle look.
Tuesday, 26 June 2018
Sunday, 24 June 2018
cherry blossoms blooming
well... at least in these cards, as the real cherry blossoms have bloomed awhile ago.
My craft room was overtaken by a scrapbook project, which I wanted to get out of the way before staring to make any cards. Making cards takes so much less space! and is much faster too!
I believe I worked on that scrapbook for couple of weeks, then again, I created it from scratch, pages, covers etc, so that took most of the time.
But now my desk is taken over by card making. Well, I had to create 14 cards for Tom to give out at the end of the school year and then made few cards myself.
So back to the cherry blossoms....
I have had this Colourful Seasons stamp set for almost a year now, but haven't really gotten to use it a lot. I did make some fall cards and few Christmas cards, but mainly using the matching framelits. Always wanted to make a cherry blossom card - and finally I did!
(I actually still have some cherry blossoms left, so there will be few more cards coming...)

The first card was made using Berry Burst (2018-2019 in colour) and Early Espresso. I also added some pearls on the flowers.
The second card was made using Blushing Bride and Early Espresso. I think I personally like this one better. Well the first one is just a little bit too dark for cherry blossoms. The leftover blossoms I have are Flirty Flamingo and uninked white, so it will be interesting to see how they turn out.
My craft room was overtaken by a scrapbook project, which I wanted to get out of the way before staring to make any cards. Making cards takes so much less space! and is much faster too!
I believe I worked on that scrapbook for couple of weeks, then again, I created it from scratch, pages, covers etc, so that took most of the time.
But now my desk is taken over by card making. Well, I had to create 14 cards for Tom to give out at the end of the school year and then made few cards myself.
So back to the cherry blossoms....
I have had this Colourful Seasons stamp set for almost a year now, but haven't really gotten to use it a lot. I did make some fall cards and few Christmas cards, but mainly using the matching framelits. Always wanted to make a cherry blossom card - and finally I did!
(I actually still have some cherry blossoms left, so there will be few more cards coming...)

The first card was made using Berry Burst (2018-2019 in colour) and Early Espresso. I also added some pearls on the flowers.
The second card was made using Blushing Bride and Early Espresso. I think I personally like this one better. Well the first one is just a little bit too dark for cherry blossoms. The leftover blossoms I have are Flirty Flamingo and uninked white, so it will be interesting to see how they turn out.
Wednesday, 18 April 2018
Renovating my old dollhouse
![]() |
| This is not my dollhouse, but mine was exactly like this! |
It has stayed in the shipping package since then. Now that my niece is coming for a visit in few weeks time, I had to get the dollhouse back together.
Downstairs backwall is Inglenook.
Two of the dividing walls got wallpaper (just some scrapbooking paper) on one side. I left one of the dividing walls out, got more of an open plan downstairs.
I also added one window in the small downstairs room. That was designed as a washroom, but since I no longer have any bathroom pieces (and when I was a kid, my dolls didn't really go to the bathroom...) I figured I'll turn it into a small bedroom.
The floor was made from coffee stir sticks (thinner and narrower than popsicle sticks), which were really easy to cut to size with craft scissors (I used Tim Holtz scissors). I also used the coffee stir sticks as baseboards.
The staircase railing broke on transport, so I removed the piece that had the remnants of the spindles and used a piece of paint stir stick as the railing. It's probably not to 'code' (fairly low), but makes it easier to move the dolls up the stairs ;-)
| Finally furnished! Might have to paint the balcony railing.... |
Friday, 13 April 2018
furniture upcycling projects
So, this spring I finally decided to tackle some of the furniture painting and upcycling projects I have postponed.
KITCHEN ISLAND
I picked up this dresser few years back in our neighbourhood. It was in pretty bad shape, needed some frame work and the top was totally gone.
So I took both sides off, replaced them with new wood, sanded the whole thing, strengthened the structure and painted it all.
The interior was bright red and I wanted to go white, so it took a good primer and several coats of white paint, but I finally got it there. The doors and the sides have been painted with Fusion Mineral Paint.
It is still missing a top, as I need to add some bookshelves to the ends to make it double the size. Then it will serve as my kitchen island.
GUEST BEDROOM NIGHT TABLE
The next project was a small nightstand. The surface of it was in pretty bad condition, so I decided to paint it and wanted to try some decoupaging on this piece. The sides had perfect rectangular shapes, that I could fill with paper. Looking it now, I think I should have painted the piece lighter, as the contrast between the decoupage paper and the piece is a bit hard, but this is what it is now.
ENTRYWAY STORAGE BENCH
The third project was an entryway storage bench. We keep our grocery bags in this unit, and it can also be used as a bench (a bit high, but works for taller people).
ENTRYWAY SIDE TABLE FROM A SHELF
Then I made a small entryway side table out of an old white floating shelf. It needed extra support as if you would lean on it, it would have fallen off the wall, so I bought some prefab legs from the hardware store and painted them the same colour as the shelf.
ENTRYWAY SIDE TABLE
I also painted another side table at our entryway (you think one side table would be enough, but we actually have 3 tables and the storage bench in our entryway!!!)
IKEA CHAIR
Then I wanted to test Indian Inlay Stencil. I knew it is a bit finicky, but I didn't want to try this stencil on a major piece of furniture without practising with it first. This was the first piece of stencilling, where I did more than just the top. I found it was tricky to keep the stencil on its place, specially on the narrow legs. So I would next time use a stencil adhesive to keep it down better. I guess I should also work with my patience. I'm always in a rush to get the item ready, so I'm really having hard time waiting for the previous stencilling to dry before tackling the next section.
CRAFT ROOM TABLE TOP
And then I did something for my craft room also. I did an new tabletop out of an old desk top. I painted it with Fusion Mineral Paint and then stencilled a lace pattern on top of it.
KITCHEN ISLAND
I picked up this dresser few years back in our neighbourhood. It was in pretty bad shape, needed some frame work and the top was totally gone.
It is still missing a top, as I need to add some bookshelves to the ends to make it double the size. Then it will serve as my kitchen island.
GUEST BEDROOM NIGHT TABLE
The next project was a small nightstand. The surface of it was in pretty bad condition, so I decided to paint it and wanted to try some decoupaging on this piece. The sides had perfect rectangular shapes, that I could fill with paper. Looking it now, I think I should have painted the piece lighter, as the contrast between the decoupage paper and the piece is a bit hard, but this is what it is now.
ENTRYWAY STORAGE BENCH
ENTRYWAY SIDE TABLE FROM A SHELF
ENTRYWAY SIDE TABLE
IKEA CHAIR
Then I wanted to test Indian Inlay Stencil. I knew it is a bit finicky, but I didn't want to try this stencil on a major piece of furniture without practising with it first. This was the first piece of stencilling, where I did more than just the top. I found it was tricky to keep the stencil on its place, specially on the narrow legs. So I would next time use a stencil adhesive to keep it down better. I guess I should also work with my patience. I'm always in a rush to get the item ready, so I'm really having hard time waiting for the previous stencilling to dry before tackling the next section.
| IKEA chair painted with Fusion Mineral Paint and Indian Inlay Stencil |
CRAFT ROOM TABLE TOP
And then I did something for my craft room also. I did an new tabletop out of an old desk top. I painted it with Fusion Mineral Paint and then stencilled a lace pattern on top of it.
Thursday, 8 February 2018
Golden Brusho butterflies
These cards were inspired by Dena Albec. They use Beautiful Day stamp set and Brusho Crystals.
I first embossed the butterflies (on both cards) in gold embossing powder on Shimmery White card stock (Shimmery White is the best card stock to use with Brusho crystals).
I also gold embossed the sentiment on Dabber Denim Card stock for one of the cards.
Then I coloured the butterflies with different techniques. The first one I sprinkled brusho on the card and spritzed it with water. I added some water on the butterfly wings with aqua painter ti cover the entire butterfly with colour.
The second card I used aquapainter to add water on the spots where I wanted yellow colour, and then sprinkled Yellow Brusho on those areas. Then I added water on the areas where I wanted green and sprinkled Moss Green on the butterfly. I tried to keep the colours away from each other. Then I added Prussian Blue to the centre parts of the butterfly wings.
Wednesday, 7 February 2018
Magical Day
Here is another card made using the 'Magical Day' stamp set and the matching thinlits.
The background is made using Brusho Crystals. On this, I sprinkled the crystals on the card stock, and then spritzed it with water. You can see that the centre of the paper got quite wet, and the crystals blended more, and at the edges, the crystals make more of a splatter design.
This card also has some dazzling diamonds.
Here are some random Brusho techniques. These will become cards at some point.
This one I watered the paper with aquapainter, and then sprinkled the brusho (Prussian Blue and some Brilliant Red)
This one is my favourite!I sprinkled Brilliant Red and Yellow Brusho on the paper and spritzed it with water. Then I let it dry completely, and then drew some swirls on the paper with aquapainter and sprinkled some more Yellow Brusho on the paper. You can actually also paint with Brusho! Just use a piece of plastic (or a clear block), sprinkle some crystals on it and use your aquapainter to pick the colour up!
Tuesday, 6 February 2018
Celebrate You!
I love this 'Celebrate You' thinlits die, available as a Sale-a-bration freebie, when placing an order of $120. Don't worry, you can get it also later this year, as it will show up again in the next annual Catalogue, at the beginning of June 2018. It has 3 dies, two of which have been used in this card. The third spells 'amazing' which I'll show in the next post.
The stamp set on this one is 'Waterfront', from the Occasions catalogue p.48.
The background is made using Brusho Crystals, also on the Occasions catalogue, p.26.
The Brusho Crystals are a cool way to make different kind of backgrounds, and I've been using them lately in almost all of my cards, just to try out different ways of using them. I'm also planning on doing a Brusho class, maybe towards the end of February, early March.
Also the cut out 'celebrate' is made using Brusho. I splashed Brusho on white card stock and once it dried, I cut out the word using the Celebrate You thinlits.
Subscribe to:
Posts (Atom)















