Masking Techniques, part 2

The first card is done by cutting out the base shape with Labels Collection Framelits.

Then I took a piece (covering the base) of scrap paper and cut the inked sized opening with a smaller framelit from the same set. I placed the stencil over the base shape and sponged some Crumb Cake ink.

Then stamped the bird from Simply Sketched Hostess Set with Early Espresso

This is one of my favourite cards in a long time. I took a piece (4"x5 1/4") Whisper White Card Stock, placed a doiley over the piece and sprizzed the cover with Pool Party ink blended with rubbing alcohol.

supplies:
- rubbing alcohol (from pharmacy)
- ink refill of your choice
- Stampin'Spritzer

Fill the spritzer with rubbing alcohol (leave little space for the ink - the darker or more tinted you want the spritz, the more space). I think with Pool Party I added about 10-15 dropps of ink. With darker colours you might want to keep it light, specially if you just want a light spray.

My spritz was a bit too light and I ended up spritzing a bit too much, so the background is not 100% even :-)

Then I removed the doiley and let the paper dry. Then stampped the flower from Oh, Hello stamp set with Pistachio Pudding and Strawberry slush. The chevron I think I stamped withPistachio Pudding and the sentiment with Bermuda Bay 

This is again using masking tape at the background. I wanted to experiment with different widths of masking tape and different colours. I should have used more orange to get the sunset looking right - oh well....


This one would need a bit more vivid Designer Series Paper or a stamp that would have larger un-inked spaces to really see what it is about.

I stamped the sunflower with VersaMark on a piece of Designer Series Paper from the Sweater Weather pack (Holiday Catalogue p. 18). Then I heat embossed it with Clear Embossing powder.

Once it had cooled down, I took a brayer and covered the DSP with Cajun Craze ink.

The embossing resists the ink, so once you are done, you can just wipe any extra ink from the image and you can see the patterned paper through the embossing. (you can kind of see the white spots from the background - can't you?)

Masking Techniques

I promised pictures of my masking technique class and finally got some pictures taken.

The first card is using Early Espresso and Crisp Cantaloupe card stocks and inks. The background "stamp" is done with masking tape (painters tape).

 

On my card I used 2 strips. You can vary the width of the tapes and leave more of a gap in between the tapes or use different colours.

I wanted more subtle look, so I went with only one colour.

 

This is how you do it:

• rip a strip apporx. 2 inches longer than what you wish to ink (just to leave you some space to handle the tape)
• open your ink pad
• Press the painters tape on the pad - STICKY SIDE DOWN (towards the pad) and "rub" the tape so that the ink sticks on the tape. NOTE! the more you rub, the more solid your tape gets covered - so if you are using darker ink or want lighter effect, don't rub too much
• grab the tape and press it on the card stock
• pull the tape off

This is one of my favourite cards - and it is SO simple - when you figure out how to do this correctly (admit - I had to try couple of times before I got the right kind of result).

I used the Beautiful Butterflies Bigz die to cut a shape from card stock - now this is where I went wrong. The card stock is too thick to then stamp the image through the cut out - I recommend using thin copy paper or even wax paper.

So my solution - I inked the En Francais background stamp (I laid it on the table, stamp side up) and then put the card stock stencil on the stamp - placed the Whisper White card stock carefully on top of the template and rubbed the card to transfer the ink (just make sure your cardstock does not move!)

Then I added some rhinestones and a Strawberry Slush heart (punched with Owl Builder Punch). So simple, so quick but SO BEAUTIFUL!

I have 2 more masking technique cards, but I'll post them later this weekend